OutBack MX60 MPPT Charge Controller
The Outback MX60 Maximum Power Point Tracking (MPPT) charge controller enables
your PV system to achieve its highest possible performance. The MPPT feature
can give you up to 30% more power from your PV Panels!
Rated for up to 60 amps of DC output current, the OutBack MX60 can be used
with battery systems from 12 to 60 vdc with a PV open circuit voltage as high
as 140 voc. The MX60's setpoints are fully adjustable to allow use with virtually
any battery type, chemistry, and charging profile.
The OutBack MX60 allows you to use a higher output voltage PV array with a
lower battery voltage - such as charging a 24 vdc battery with a 48 vdc PV array.
This reduces wire size and power loss from the PV array to the battery location
while maximizing the performance of you system and saving you money!
The OutBack MX60 comes standard with an easy to use and understand display.
The four line, 80 character, backlit LCD display is used for programming and
monitoring of the system's operation including built-in Data Logging with 64
days of memory.
|Output Current Rating
||60 amps DC Maximum at
12, 24 or 48 VDC
|Nominal Battery Voltage
||12, 24, 32, 36, 48,
54 or 60 VDC (programmable)
|PV Open Circuit Voltage
||125 VDC Maximum
|Standby Power Consumption
||Less than 1 watt typical
||Five Stage: Bulk, Absorption,
Float, Silent, Equalization
|Voltage Regulation Setpoints
||13 - 80 VDC
||Adjustable 1.0 to 5.0
VDC above Bulk Setpoint
||Programmable slope -2.0mV/oC/Cell
|Voltage Step-Down Capability
||Can charge a 12 or 24
VDC battery from a 48V nominal PV array
|Power Conversion Efficiency
||99.1% @ 40 amps Output
97.3% @ 60 amps Output
||4 line 80 character
backlit LCD Display
|Remote Interface RJ
||45 Modular Connector
CAT 5 Cable 8 wire
||-40 to 60░C Power derated
||Indoor Type 1
||Two 3/4 - 1” on the
back; One 1” - 1 1/2 “ on each side; Two 1” - 1 1/2” on the bottom
||Two years parts and
labor Optional Extended Warranty
14.5 “ H x 5.75” W x 5.75” D Shipping box: 17.75” H x 10” W x 7” D
||12 lbs. - 5.4 kg
You can upgrade the product by selecting the respective upgrade below.
|System Display and Controller:
|Temperature Sensor RTF: