|
The new solartracker
"Suntracer OG+"
Solar motor
made for 12V or 24V system. Suitable for fixed usage at homes and weekends,
where medium power up to 210W and wind resistance up to 140km/h are required.
All metal parts inside ensure higher destruction forces.
The SunTracer OG+ solar motor
kit comprises:
1. SunTracer motor
2. Positioner
3. Timer
4. Background for the automatic rotation of a solar cell
Description:
- Designed for solar system voltages of 12V and 24V
- Stronger, steel wheel gears for solar panels - cells of up to 1.3 m2
in area
- Strong background telescopic arm designed for solar panels - cells of up to
1.3 m2 in area
- Adjustable switch-on voltage from 8V to 13V, adjustable switch-off voltage from 13,6V
to 18,6V (@ 12V system)
- Adjustable switch-on voltage from 21V to 26V, adjustable switch-off voltage from 26,6V
to 31,6V (@ 24V system)
- Output breakdown torque 200 Nm or more (measured)
- Maximum wind speed that the motor with a solar cell can safely withstand is
140 km/h
Features
- A professional motor with a positioner, a power-supply regulator
and telescopic back structure for the automatic rotation of a solar cell.
- A strong, heavy-duty aluminum housing, and a powerful metal motor pole.
- Polarmount structure for the horizontal tracking of the sun orbit.
- Motor rotation up to 100°, which means 8 hours of tracking the sun at the
right angle.
- Used for solar cells up to 1,3m2, or up to 200W, depend from model.
- Low power consumption of the motor.
- Discharge protection via a solar cell.
- Easy sun clock sinhronization.
- A back-up battery for the internal time and date.
- Suitable for use in tropic and desert conditions.
- Made in Europe.
Technical data
- Operation protocol: MSCS-
- Horizontal rotation: typically 98° (100° max.)
- Motor inclination (elevation): 75°
- Maximum dimension of a solar cell: 1,3m x1m aluminum structure depend from
module
- Maximum weight of a solar cell: 22 kg at solar cell rotation through the gravity
point
- Motor pole length: 115 mm
- Pole diameter: o40 mm
- Rotation speed: 1.33°/s ±25% @50W solar panel, @ -10°C
- Motor power supply from a solar cell: from 7 to 43 VDC
- Maximum charge current: 8,5A
- Power consumption in idle state: 15 mA ±25%
- Operating power consumption (50W solar cell): 110-130 mA ±25%
- Start-up current: 200 mA @ t<0,25s
- Operating temperature range: -30°C +70°C
- Operating relative humidity: 0% to 100% relative humidity
- Connector: tubular clip, 19mm2, over a wire
- Connection: two 2-wire cables, with a 4mm2 inner conductor
- EAST-WEST limit: limit switches & software limit
- Minimum moving step (automatic): 3,75°
- Weight with packaging: 2.3 kg (motor), and 3,1 kg (back structure)
- Max. operating torque of the output pole:
- Sun Clock sinhronization: two buttons pressed simultaneously for 5 sec
- Dimensions of a packed motor: 597 (L) x 135 (W) x 170 (H) mm
- Lifetime: 20.000 periods over 190° (95°E+95°W)
Real energy measurement of two
equal solar panels (fixed and motorized)
Two equal solar panels were exposed to the real sun and conversed electrical
power was measured.
Test conditions:
Solar panels (both): 50W (producer spec. at AM
1.5)
Date:
July 2005
Time:
4:00 to 20:00 (sun time)
Geo. Latitude:
46° N
Weather conditions: sunny, but not totally clear
Results:
Average energy of fixed:
209,2Wh
Average energy of motorized: 338,5Wh
Note: sum of motor energy consumption through all day is 0.0832Wh or 0.025%
of all collected energy.
Efficiency of motorized panel:
161,8%
UpgradeYou can upgrade the product by selecting the respective upgrade below. |
| Attachment: |
|
| Charge Controller: |
|
| Solar Panel: |
|
|
