|
SCHOTT Solar produces high-performance modules in energy
output classes 50 Wp and higher. High quality crystalline EFG and MAIN cells
ensure maximum energy yield. These modules have been awarded top ratings in
a number of independent studies and surveys. Every module type is designed –
from frame to connection box – for cost-effective system integration.
Narrow output tolerance:
A very narrow module output selection permits serial
connection with low connection losses.
Long-term stability:
The full-square cells are embedded in hardened double
glass. A specially developed encapsulant ensures long-term stability, even under
extreme climatic conditions.
System voltage up to 1000
V:
The Safety Class II module is configured for system
voltage of up to 1000 V. It is suitable for grid-connected systems.
Quick and easy installation:
The anodized aluminum frame and the preinstalled cable
with innovative Tyco- Connectors ensure quick and easy installation.
One step ahead:
The special SCHOTT Solar cell technology using multicrystalline
wafers ensures optimum output and efficiency
Technical Details
ASE-275-DG-FT |
|
Details |
| Nominal power |
Pnom |
283
Wp |
| Voltage at maximum-power point |
Umpp |
58,2
V |
| Current at maximum-power point |
Impp |
4,78
A |
| Open-circuit voltage |
Uoc |
72,3
V |
| Short-circuit current |
Isc |
5,33
A |
| Dimensions (tolerances + 4/- 1 mm) |
mm² |
1605
x 1336 |
| Thickness (tolerances ± 1 mm) |
approx |
50
mm |
| weight approx. |
kg |
41,0 |
The rated power may vary by ± 5% and all other
electrical parameters by ±10%.
|
